10kv 15kv High Voltage Outdoor Disconnector Rotary Isolation Switch

• Customization: Available
• Type: High-voltage
• Structure: Double-column Disconnector
• Model NO.: GW9
• Installation: Indoor High-voltage
• Operation: Electric
• Grounding Mode: Grounding
• Movement Mode: Horizontal Rotary Type
• Number of Poles: Unipolar
• Grounding: Single Ground
• Series: Three
• Run: Turn the Horizontal
• Switching Mode: Single Throw-in
• Structure of Operating: Electric
• Certification: CE, IS9001, ISO9001
• Rated Voltage: 10-15kv
• Language: Chinese, English, Russian
• Price: Negotiable
• Rated Current: 200A-1250A
• Loading Port: It Depends
• Transport Package: Cartons or Others
• Specification: As required
• Trademark: HEZC
• Origin: China
• Production Capacity: 50000pieces/Year

Product Description

Company Profile

Henan Energy Electric Equipment Co., Ltd. was established in 2011 and is an excellent and reliable power equipment manufacturer in China. The company mainly develops and produces oil-immersed transformers, dry-type transformers, box-type substations, high-voltage switches, and medium and low voltage complete sets of equipment. The equipment put into production and operation of the project advocates energy saving, intelligence, informatization, and mechanization. The company has established the Henan Triangle Energy-saving Transformer Engineering Technology Research Center, with 71 utility model patents and 15 invention patents. With years of accumulation in the transformer industry and strong technological innovation capabilities, HZEC products are sold to the Middle East, North America, South America, Europe, Southeast Asia, Africa, and other regions, covering more than 40 countries.

Product Description

This product is a three-phase line system single-phase use, simple structure, economy, easy to use. This product is a single-break vertical open structure, single-pole isolation switch pillar insulator is installed on the respective base frame, mainly by the base, pillar insulator, the main circuit part, self-locking device and so on.
The knife structure is used to cut off and close the circuit. Each phase of the knife is composed of two conductive blades, both sides of the blade are equipped with compression springs, adjusting the height of the spring can obtain the contact pressure required by the switch knife. When the switch is opened and closed, the insulated hook rod is used to operate the mechanism part, and the knife has a self-locking device.

Product Parameters

Item			Unit	Data
Rated voltage			KV	10	15
Max. working voltage			KV	12	7.5
Rated insulation level	1min power frequency withstand voltage	Ground	KV	40	40
		Break	KV	47	47
	Ligtning impulse withstand voltage (peak)	Ground	KV	105	105
		Break	KV	120	120
Rated frequency			HZ	50
Rated current			A	200                400               630               1250
4s thermostable current (valid)			KA	6.3                 12.5               20                  31.5
Dynamic stable current			KA	16                  31.5               50                  80
Creepage distance			mm	300	380
Mechanical life			Time	2000

Structure Diagram

GW9-10 Single Wiring Hole                                                                                           GW9-10 Double Wiring Hole

 

Service Environment

1. Altitude: below 2000m;
2. Ambient air temperature :-25ºC~+40ºC;
3. Relative humidity: the daily average is not more than 95%, the monthly average is not more than 90%;
4. The surrounding air should be free from corrosive or flammable gases, water vapor and other obvious pollution;
5. No frequent violent shaking.

Working Principle

When the isolation switch is switched on, it is operated with an insulating hook. The insulating hook hooks into the locking hook of the isolation switch, pulls the locking hook to the opening direction, unlocks the self-locking device and drives the connected conductive plate to rotate to realize the opening action. When closing, the insulating hook sticks against the locking hook of the isolation switch and drives the rotating shaft to rotate the connected conductive plate to the closing position. At this time, the self-locking device locks the isolation switch in the closing position.
This type of isolation switch can be installed on the pillar, wall, ceiling, cross frame or metal frame, can also be vertically installed, inclined installation, but the installation position should be so that when the contact knife is opened, it tends to the lower.

Packaging & Shipping

Certifications